Did you accidentally drop your phone in water or spill liquid all over it? Don’t panic, it happens to all of us. While most smartphones are water-resistant nowadays, they are not immune to water damage, especially when it comes to the charging port. In this article, we’ll discuss the safest ways to remove water from your charging port and avoid further damage.
Table of Contents
Is it Safe to Charge Your Wet Phone?
If your phone gets wet, it’s not safe to charge it right away. Charging a wet phone can damage the pins inside the charging port as well as the charging cable. In some cases, it can even lead to electric shocks. Therefore, it’s best to avoid charging your phone until it’s completely dry.
To determine if your phone is safe to charge, check its IP rating. An IP rating measures the phone’s protection from water and dust particles. A higher rating means better protection. For example, an IP68 rating indicates complete protection from dust and moisture. Samsung S22 series and iPhone 13 both have an IP68 rating. If your phone has a high IP rating and the charging port is just slightly wet, you can still use a cordless charger. Just make sure the port is completely dry before plugging it in.
First Aid to Prevent Water Damage
If your phone gets wet, here are a few first-aid steps you can take to prevent water damage:
- Quickly turn off your phone.
- Remove any accessories, including the charger, earphones, and phone cover.
- Hold your phone in an upright position to prevent water from spreading further.
How to Remove Water from the Charging Port
Now, let’s discuss how to safely remove water from your charging port if it gets wet. Please note that attempting any of the following methods is at your own risk.
1. Remove Moisture
Start by trying to remove any moisture from the surface of the charging port. You can use a towel or a soft cotton cloth to gently rub the port and soak up as much moisture as possible. Avoid being too harsh, as it can damage the port or push water further inside. Afterward, wait for about half an hour to let your phone dry naturally.
2. Let it Evaporate
Believe it or not, the most effective way to dry your phone is to let it evaporate naturally. Place your phone in an upright position in a well-ventilated area and wait for a few hours. During this time, the moisture trapped inside the port should evaporate on its own.
3. Use a Wireless Charger
If your phone still doesn’t charge with a cable after trying the previous methods, you can try using a wireless charger. Just make sure your phone is dry before placing it on the charger.
4. Contact Customer Service
If none of the above methods work and you are certain that the charging port is damaged, it’s best to contact customer service. Android users can visit their official website or a nearby walk-in service center for support. iPhone users can visit the Apple Support page or a local service center.
Debunking Popular Methods
There are many quick-fix methods circulating online for drying water-damaged phones, but most of them do more harm than good. Let’s debunk some of these myths:
- Dry in the Sun: Prolonged exposure to the sun can cause permanent damage, such as overheating the battery and distorting the internal parts.
- Dry Rice: While rice can absorb moisture, it can also leave dust particles inside the charging port. Silica gel packs are a better alternative.
- Cotton Swab: Inserting a cotton swab into the port can push water further inside or loosen the connection points.
- Paper Towel: Inserting a paper towel into a wet port can make it stuck and harder to clean.
- Vacuum: Using a vacuum hose can cause air pressure that may damage internal parts and cannot remove liquid dirt from the port.
- Hair Dryer: Blowing hot air directly into the port can damage heat-sensitive components and cause moisture buildup.
- Letting Your Phone Sit: Letting your phone sit while wet can lead to corrosion, which is a slow damage process.
- Shaking the Phone: Shaking the phone takes water further inside and can lead to more damage.
- Toothpick: Pushing anything sharp, including a toothpick, into the port can damage the connection points.
Signs of Water Damage
If you’ve followed the recommended steps and your phone still isn’t responding, it may have sustained water damage. Here are some signs that indicate water damage:
- Corrosion: If you notice signs of corrosion around the charging port, it’s time to seek professional help as corrosion causes permanent damage.
- Phone Doesn’t Power On: If your device doesn’t power on even though it’s dry, it signifies that water has reached the internal parts.
- Phone Gets Hot: Excessive heat from the battery indicates water damage and can be costly to repair.
- Problem with Speakers: If the speaker or microphone stops working, it’s a clear sign of water damage.
- Foggy Screen: Water droplets or fog forming underneath the screen is a major indicator of water damage.
- SIM Card Issues: If the phone doesn’t recognize the SIM cards, it’s time to contact customer service.
How to Know if Your Phone is Completely Dry
If you no longer see any moisture or liquid detection alerts on your phone, it’s a good sign that it’s dry. Also, if you don’t experience any glitches, your phone is likely 100% dry.
However, if you still receive false moisture detection alerts despite your phone being dry, you can try the following solutions:
1. Disable Moisture Alert
Go to your phone’s settings and disable the moisture detection alert if you’re certain that the port is dry.
2. Power Cycling
Shut off your phone, wait for a minute or two, and then power it back on. This simple reset can resolve many issues.
3. Update Your Device
Check for any available software updates, as these updates often fix minor bugs and glitches.
4. Replace the Charging Cable
Inspect the charging cable for any signs of moisture or damage. If it’s wet or damaged, replacing it can eliminate false alerts.
5. Restart Your Phone in Safe Mode
If power cycling doesn’t work, try restarting your phone in safe mode to troubleshoot the issue.
6. Look for Rust Inside the Charging Port
Check the charging port for any rust or small particles that might trigger false alerts. Use a flashlight for a closer inspection, but avoid pushing any sharp objects inside.
7. Consider a Full Factory Reset
If all else fails, you can perform a full factory reset. Remember to back up your data before doing this, as it will erase everything on your phone.
8. Repair or Replace the Charging Port
If none of the solutions work, it may be time to have the charging port repaired or replaced. Bring your phone to a walk-in store or a local repair shop.
Water-resistant smartphones are not completely waterproof, and the charging port is susceptible to damage from water. To avoid further damage, always make sure the port is dry before charging your phone. Remember to avoid popular but harmful methods such as using a hairdryer, putting your phone in rice, or poking the port with sharp objects. By following the safe methods outlined above, you can increase the chances of saving your water-damaged phone. For more information on various topics, visit 5 WS. Stay safe and keep your devices dry!