If you own a Nissan vehicle, you likely have a key fob that allows you to easily lock and unlock your car with the touch of a button. However, like any battery-powered device, the battery in your Nissan key fob will eventually need to be replaced. In this guide, we’ll walk you through the steps you need to take to change the battery in your Nissan key fob.
Step 1: Purchase the Right Battery
Before you start the process of changing the battery in your Nissan key fob, you’ll need to purchase a new battery. The type of battery you need will depend on the year and model of your Nissan vehicle. Typically, Nissan key fobs use a CR2032 lithium battery. You can find this battery at most hardware stores, electronics stores, or online.
Step 2: Locate the Battery Compartment
The next step is to locate the battery compartment on your Nissan key fob. The location of the battery compartment will vary depending on the model of your key fob. In most cases, you can find the battery compartment by looking for a small slot or notch on the side of the key fob.
Step 3: Open the Battery Compartment
Once you’ve located the battery compartment on your Nissan key fob, you’ll need to open it. To do this, use a small flathead screwdriver or a similar tool to gently pry open the battery compartment. Be careful not to damage the key fob or the battery compartment when doing this.
Step 4: Remove the Old Battery
After you’ve opened the battery compartment on your Nissan key fob, you’ll need to remove the old battery. You can do this by gently pushing the battery out of the compartment using your finger or a small tool.
Step 5: Insert the New Battery
Once you’ve removed the old battery from your Nissan key fob, you’ll need to insert the new battery. To do this, simply place the new battery into the battery compartment, making sure that the positive (+) side is facing up.
Step 6: Close the Battery Compartment
After you’ve inserted the new battery into your Nissan key fob, you’ll need to close the battery compartment. To do this, simply push the battery compartment cover back into place until you hear it click.
Step 7: Test the Key Fob
The final step is to test your Nissan key fob to make sure that the new battery is working properly. To do this, stand near your Nissan vehicle and press the lock or unlock button on the key fob. If your vehicle responds as expected, then you’re good to go! If not, you may need to double-check that the battery was inserted correctly or replace the battery with a new one.
Changing the battery in your Nissan key fob is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can easily replace the battery in your key fob and ensure that it continues to work properly. If you have any questions or concerns about changing the battery in your Nissan key fob, don’t hesitate to reach out to a qualified mechanic or Nissan dealership for assistance.